Xfinity Remote Not Working

Firstly, you should check to see if your Xfinity remote is programmed correctly.

Different TVs have different ways of connecting to the Xfinity remote, so you will need to make sure that this is correct for the remote to work again.

There are many ways to do this, depending on the model of the Xfinity remote, so let’s go through them!

This Xfinity remote works with the Xfinity Flex TV box.

All you need to do is point the remote at the television and press the “Voice” button.

Then, on-screen instructions will appear on the TV. Follow them to finish pairing the remote and the box.

If you have a normal TV, then you need to press and hold the “Voice” button, and then say the “Program Remote” instruction.

All you have to do from here is follow the instructions and check to see if the remote works.

To program this remote to a TV, you need to press and hold down both the mute and Xfinity button on the remote for at least five seconds.

Once the light on the top of the remote changes color, (red to green).

Then, you enter the TV-specific 5-digit code, which you can find on the Xfinity website. Now, the remote should have paired and be in working order again!

To program this remote to a Xfinity X1 box, then you need to press down and hold the Xfinity and “i” button.

Then, you will have access to a code that will give you further access to screen prompts.

Follow these to pair to the Xfinity remote.

For this remote, you need to hold down the button called “Set Up” until you see a light on the remote change color from red to green.

Then, you simply need to press the remote’s Xfinity button and enter a 3-digit code.

Unfortunately, your Xfinity remote may not work even after these changes.

If you find your remote is still not working, then there may be a problem with the remote itself, rather than its connection to the TV.

If you suspect this to be the issue, then it is time to reset the Xfinity remote.

Here’s how to do it!

Resetting this Xfinity remote is simple.

All you need to do is press and hold down the “I” and “Home” button on the remote at the same time. Then, you need to wait for the light on the remote to blink.

Once this has happened, all you have to do is press the “Power” button, the “Last” button, and the “Volume Down” button in that order.

This should reset the Xfinity remote.

To set this remote, all you need to do is press and hold the “A” and “D” buttons at the same time.

Wait until the light on the remote blinks.

Once this happens, you simply need to press 9-8-1, which will factory reset the Xfinity remote.

To reset this Xfinity remote, you need to press and hold “Setup” until the light changes from red to green.

Once this happens, simply tap in 9-8-1 and wait for the light to blink green.

Once it has done that twice, the remote has officially completed the factory reset process.

Occasionally, neither programming nor resetting the Xfinity remote will make it work again.

If this is the issue at hand for you, then you may need to reset your Xfinity box.

This is simple to do. Just press down and hold the reset button on your Xfinity box for about five seconds.

Alternatively, you can follow the instructions on the app to reset your Xfinity box.